Žilinská univerzita v Žiline

Permanent URI for this communityhttps://drepo.uniza.sk/handle/hdluniza/1

Browse

Start date: 2021Subject: search.filters.subject.analysis

Search Results

Now showing 1 - 8 of 8
  • No Thumbnail Available
    Item
    Letecké multispektrálne snímkovanie v poľnohospodárskom odvetví
    (University of Žilina, 2024) Šmidt, Marco; Veľký, Patrik
    This thesis focuses on the possibilities of applying airborne detection in many bands. Possibilities of multispectral detection in direction of use such as animal monitoring or scarecrow placement. In another direction of using thermal imaging for finding temperature anomalies or obtaining information from UAV sensors to improve economics in agriculture, light reflectance, electromagnetic spectrum, comparing satellites and UAVs in agriculture, and vegetation indices. The analysis of the studies was based on simulations and calculations followed by laboratory tests and external measurements. Using certain sensors operating in the corresponding regions of the frequency spectrum, the detection ranges of the drones were used to find the outputs derived from the calculated and simulated values, where a comparison of the studies followed.
  • No Thumbnail Available
    Item
    Analýza súčasného stavu problematiky využitia manipulačných zariadení pre potreby skúšobných stavov brzdných komponentov koľajových vozidiel
    (University of Žilina, 2024) Molnár, Denis; Blatnický, Miroslav; Dižo, Ján; Lovska, Alyona
    The paper deals with the current state of the art of the research test stands of braking components of rail vehicles in synthesis to the need of handling equipment utilisation accompanying the research in question. The compact form of the introduced information will be the input material for the design of an original handling device, sophisticatedly designed for the needs of the test stand for rail vehicles brake components testing. The brake test stand is located at the Department of Transport and Handling Machines at the Faculty of Mechanical Engineering of the University of Žilina. The task of proposed handling device will be to facilitate the work of laboratory staff, increase the safety of handling and shorten the preparation time of the measurement process at brake test stand. In addition, a more detailed description of the brake test stand at the Department of Transport and Handling Machines is included in the paper.
  • Thumbnail Image
    Item
    Materiály práškovej metalurgie
    (University of Žilina, 2024) Kantoríková, Elena
    Powder metallurgy is used in all branches of industrial production. the main advantage of powder metallurgy is the saving of metals (materials) and energy. the main direction of development is expected mainly in the production of tool parts. the article describes the analysis of powders and the use of materials for powder metallurgy.
  • Thumbnail Image
    Item
    Workshop production management methods
    (2024) Zuzik, Ján; Biňasová, Vladimíra; Gašo, Martin; Furmannová, Beáta; Kasajová, Marta
    The contribution is devoted to a mechanical engineering company, then the methods of workshop production management and the systems that are used in this management are discussed in detail. At the beginning of the practical part, the current state of workshop management is identified using a questionnaire. In the second part, there is an analysis of workshop management in the company and a proposal for improving the given management
  • Thumbnail Image
    Item
    Bezpečnosť účastníkov cestnej premávky a ich vplyv na vnímanie dopravnej situácie
    (University of Žilina, 2023) Ballay, Michal; Macurová, Ľudmila; Kohút, Pavol; Rédl, Miroslav
    When analysing an accident scene, one of the significant tasks is to evaluate the driver's ability to perceive the traffic situation according to different aspects. Currently, there are various eye movement measurement systems designed to perform a high-quality reconstruction of the direction of eye movement of road users depending on time. In addition to the basic physiology of the perception of road users, the paper deals with using the Viewpointsystem® measurement system designed to analyse eye movement when perceiving the traffic situation. The article assesses the development of traffic accidents in the Slovak Republic according to the consequences of traffic accidents and categories of road users. As part of determining the decisive moment for a collision situation, an analysis of the direction of the eye movement of the driver of the vehicle during a dangerous traffic situation while driving on a road section located in a rural area is performed.
  • Thumbnail Image
    Item
    Optimization of ground handling processes at KSC airport
    (University of Žilina, 2023) Baštáková, Zuzana; Rostáš, Ján
    Content of this professional article is to describe ground handling processes at the airport in Košice. The main goal is to optimize ground handling with an emphasis on their efficiency not only from the point of view of the range and quality of services provided, but also their correct timing. At the beginning of the article, I describe ground support equipments as well as all related activities that must be performed by handling workers to ensure the smooth operation of the airport and the satisfaction of air carriers, including their passengers. Part of the work is the analysis of technical parameters and functionalities of the equipment and technologies used on apron. The next part is devoted to the description and analysis of the system of ground handling at Košice airport. The last part will belong to the issue of process improvement with the identification of proposed changes leading to more efficient ground handling.
  • Thumbnail Image
    Item
    Analysis of selected aircrafts suitable for PPL training
    (University of Zilina, 2021) Matula, Dominik; Bugaj, Martin
    The main goal of the paper is based on the analysis to define the criteria for selecting an aircraft suitable for PPL training. We achieved the main goal by meeting two sub-goals. The first sub-objective is the analysis of training organizations in Slovakia, on the basis of which we have selected entities for the second sub-objective thus the analysis of selected aircrafts suitable for PPL training. In this work we analyze three, most used training aircrafts for PPL training in Slovakia. We analyze selected aircrafts in terms of three main parts, which include, analysis of technical parameters, analysis of flight characteristics and analysis of operating parameters. Based on the given analyzes, we obtained an evaluation of the characteristics of selected aircrafts, their individual advantages and disadvantages. Other results of the work include the evaluation of criteria that are suitable for aircrafts designed for PPL training. This work can be applied in practice, especially when deciding on the selection of a training aircraft for a student or training organization.
  • Thumbnail Image
    Item
    Analysis of new progressive diagnistic methods in the area of aircraft maintenance
    (University of Zilina, 2021) Supuka, Matej; Hrúz, Michal
    In the area of aircraft maintenance, we commonly meet with the problem of corrosion, detection of which is one of the primary obstacles. Implementation of modern sensing techniques has a potential to bring many benefits. The objective of this work is to analyze technologies, their potential applications, and viability of switching to autonomous detection using computer aided sensing. Primary source of information were research articles from science databases such as ResearchGate and ScienceDirect. Available documents were analyzed and subsequently, useful information was extracted. First part deals with theretical knowledge about corrosion, based on which potential technologies were chosen. Those were then described, and their viability was analyzed, based on how well they could achieve our goals. Selected technologies have shown potential, however necessary solutions could not be found to enable fully switching tou autonomous computer detection. Although data acquired show many potential benefits that could arise from partial implementation of these technologies combined fith old fashioned visual inspection.